lever : Idioms & Phrases


Ball lever

  • the lever used in a ball cock.
Webster 1913

Compound lever

  • noun a pair of levers hinged at the fulcrum
WordNet
  • a machine consisting of two or more levers acting upon each other.
Webster 1913

foot lever

  • noun a lever that is operated with the foot
    pedal; treadle; foot pedal.
WordNet

gear lever

  • noun a mechanical device for engaging and disengaging gears
    gearshift; shifter; gearstick.
    • in Britain they call a gearshift a gear lever
WordNet

Lever escapement

  • . See Escapement.
Webster 1913

lever hang

  • noun a hang performed on the rings with the body stationary in a horizontal position
WordNet

Lever jack

  • . See Jack, n., 5.
Webster 1913

lever lock

  • noun a lock whose tumblers are levers that must be raised to a given position so that the bolt can move
WordNet

lever scale

  • noun a portable balance consisting of a pivoted bar with arms of unequal length
    steelyard; beam scale.
WordNet

lever tumbler

  • noun a flat metal tumbler in a lever lock
    lever.
WordNet

Lever watch

  • a watch having a vibrating lever to connect the action of the escape wheel with that of the balance.
Webster 1913

Pneumatic action, ∨ Pneumatic lever

  • (Mus.), a contrivance for overcoming the resistance of the keys and other movable parts in an organ, by causing compressed air from the wind chest to move them.
Webster 1913

Side lever

  • a working beam of a side-lever engine.
Webster 1913

Side-lever engine

  • a marine steam engine having a working beam of each side of the cylinder, near the bottom of the engine, communicating motion to a crank that is above them.
Webster 1913

spark lever

  • noun (on early automobiles) a lever mounted on the steering column and used to adjust the timing of the ignition
WordNet

Throttle lever

  • (Steam Engine), the hand lever by which a throttle valve is moved, especially in a locomotive.
Webster 1913

To be lever than

  • . See Had as lief, under Had.
Webster 1913

Universal lever

  • a machine formed by a combination of a lever with the wheel and axle, in such a manner as to convert the reciprocating motion of the lever into a continued rectilinear motion of some body to which the power is applied.
Webster 1913